Products Services

Industrial flooring products have always been at the heart of Floortec Our portfolio includes everything an industrial floor could require at every stage of its construction

ARMORED JOINTS

ARMORED JOINTS

To protect construction joint arises.

FORMWORK

FORMWORK

To provide a boundary for the concrete pour.

JOINT SEALANTS

JOINT SEALANTS

To fill saw-cut joints in concrete floors.

RESIN COATINGS

RESIN COATINGS

For a decorative, smooth and durable finish.

FLOOR HARDENERS

FLOOR HARDENERS

To improve durability in hardworking applications.

DRY-SHAAKE TOPPINGS

DRY-SHAAKE TOPPINGS

For color and durability and abrasion and slip resistance.

DECORATIVE FINISHES

DECORATIVE FINISHES

To enhance appearance and style.

BONDING AGENTS

BONDING AGENTS

Used when forming a floor in multiple layers.

STEEL FIBERS

STEEL FIBERS

Adding strength to concrete.

ACCELERATING ADDITIVES

ACCELERATING ADDITIVES

To speed up the curing time and increase early strength.

Flooring Applications

Flooring is the general term for a permanent covering of a floor, or for the work of installing such a floor covering. Floor covering is a term to generically describe any finish material applied over a floor structure to provide a walking surface.

Seamless Concrete

The Floortec Seamless Concrete slab combined with either super duty stone ,mineral or steel densified surface finish or absorption process concrete floor topping has produced the most trouble free industrial floors in the industry

Floortec Seamless Concrete® slabs are created by blending proprietary expansive material, with conventional concrete at the local batch plant. Differing from pre‐blended mixes, using Floortec allows control of the amount, rate, and longevity of expansion to meet the conditions encountered in any location. This process eliminates approximately 50% of the joints found in a typical floor. Eliminating joints increases production by decreasing the need for maintenance, saving the owner time and money

Absorption Process Toping

Floortec Absorption Process® (AP) concrete floor topping is a different thick deferred topping bonded to an old or new, previously hardened base slab.

AP Topping is designed to provide trouble-­‐free service in extreme industrial environments or where facility cleanliness is important. It is not unusual for these floors to provide more than 25 years of service in high forkliU traffic conditions.

Floortec AP Topping installed over a Floortec Seamless Concrete base slab produces the ul-mate in trouble-­‐free flooring. This winning combination reduces floor joints by up to 50% of that found in a typical floor saving the owner repair and maintenance costs in the future

You can bring new usefulness to an old facility resurfing the floor with Floortec AP topping. The topping can replace a floor that has simply been worrn out or may be need some upgrading in either cases is a prac-cal and cost-­effective alterna-ve to abandoning an otherwise useful

Chem Resistant

Floortec Absorption Process® (AP) concrete floor topping is a different thick deferred topping bonded to an old or new, previously hardened base slab.

AP Topping is designed to provide trouble-­‐free service in extreme industrial environments or where facility cleanliness is important. It is not unusual for these floors to provide more than 25 years of service in high forkliU traffic conditions.

Floortec AP Topping installed over a Floortec Seamless Concrete base slab produces the ul-mate in trouble-­‐free flooring. This winning combination reduces floor joints by up to 50% of that found in a typical floor saving the owner repair and maintenance costs in the future

You can bring new usefulness to an old facility resurfing the floor with Floortec AP topping. The topping can replace a floor that has simply been worrn out or may be need some upgrading in either cases is a prac-cal and cost-­effective alterna-ve to abandoning an otherwise useful

Floor Rehabilitation

Turn a problem industrial concrete floor into a productive work surface:

1. That old, dark concrete floor with a rough and pebbly surface, scarred by skid marks or years of epoxy-painted staging lanes does not always have to be replaced. For less than half the cost of a new floor, Floortec Company can restore your old floor to any kind of finish you need. The rejuvenation rehabilitation creates a hardened, smooth, dust-free if possible, shiny and efficient floor surface-its ideal for rack-supporting building floors.

2. The Floortec Floor Rehabilitation process is done with minimal down time and minimal disruptions to your daily operations. Our process allows your operations to continue while only portions of your floor are taken temporarily out of service. The process is ideal for facilities with 24/7, 365-day operations.

Jointless Systems

Which is the most commonly used flooring type, where less contraction or construction joints are required.
The free plan dimension are chosen dependently on acting loads, loading nature, racking
alignment.
Floortec possesses the most recently equipment and technology that can serve this work, in addition to presenting the proper HARDENING and CURING MATERIALS which add a value for this scope of work.
It may be presented through one of the following types: Slab On Grade (SOG) reinforced with STEEL FIBERS.
Slab On Grade (SOG) reinforced with both STEEL AND MICRO FIBERS.
On the right samples are found for the armored joints which is used in case of jointless flooring instead of the traditional saw cut joints which increase the ability of the concrete floor to withstand the heavy duty work and increase its life time.
Using laser screed the laser screed and double trowel are used to obtain as much tolerance and levelness of the floor as possible in case of jointless flooring since it acts with laser receivers and transmitters also it has the ability to carry out reasonable amount of flooring per hour.

Flooring Super Duty

[ Stone, Mineral or Steel densified ]

1. The Floortec super duty floor is a long lasting and durable floor finish for moderate duty industrial usage. The key to this floor is the way the cement-coated aggregate is incorporated into the surface of the floor.

2. After a concrete slab is in place, but before it is fully hardened, the surface is covered with abrasion-resistant aggregate and carefully embedded for strength. Using procedures developed by NOVOCHEM (subsidiary company), the surface is kept open so that free moisture can escape. Once the free moisture is evaporated then the floor is troweled to produce a smooth, hard, dense surface.

3. It is not enough to simply go through the steps in order to produce a true Floortec super duty floor. The timing of each operation is critical and requires a great deal of experience to “read” each step. Floortec crews have the experience and attention to detail that is required for installation of a premium Floortec super duty floor.

Metal Decking Screed

Decking is commonly used in MEZZANINE or ROOFING floors systems. Which are mostly constructed with a composition of steel corrugated sheet overlaid with concrete decking. When it comes as a finish exposed surface, it needs a high quality of application to achieve its purpose.

Floortec possesses the smart solutions for the required levelness and flatness needed.

It may be presented through one of the following types:

1. Concrete Screed reinforced with MICRO FIBERS, when it comes over a reinforced
concrete base.
2. Concrete Screed reinforced with both UPPER STEEL MESH AND MICRO FIBERS, when it comes over a steel corrugated sheet.